Case mouth chamfering tools?

[Oregon Bill]

Who makes a decent hand tool for this that will fit the various .50 cases such as the .56-50 and .50-70? My little old Lee is a loose fit.

[DJ]

You can order one from CH4D die company or, if you're lucky, find one made by Lyman in a well-stocked gun shop (or order it).  Be very careful not to let the tool roll off your bench--one drop on a concrete floor can break off an outside chamfering tine and render the tool useless for outside chamfering.

[Hell-Er High Water]

Midway sells the Lyman tool.  This tool is advertised as good for up to 60 caliber.  It is works great for the 56-50, 50-70, etc.  The Lyman P/N is 7810206.  the Midway item No. is 285108 and is lists for $16.99 + shipping.  It's not cheap, but well worth the cost.

HHW

[Dakota Widowmaker]

I believe the 50AE trimmer kit will work.
(internally, the 50AE has the same height as the 56-50)

I'll have to double check.

Lee can also make custom trim kits for $20.

[Backstrap Bill]

The Lyman tool Hell er High Water recommended works very well.