uberti 51 navy safety issue

[nativeshootist]

I bought a uberti 51 navy and its a fine gun, however when I place it on the safety pin it jams. I cannot cock it at all, the hammer barely moves. I tried trying it with the barrel removed and it still doesn't cock after its placed onto the pins. Im figuring its down to the hand but not sure.

[Abilene]

It could be the bolt leg is not resetting on the hammer cam. 

[nativeshootist]

i took the grip frame off to observe the action to see what you said is whats happening. however, as i started to take parts out and was left with the just the hammer and the cylinder and it was still jammed. i have no idea

[Coffinmaker]

I was going with a PLUS ONE for Abilene, but if your down to just the Hammer and Cylinder and it's still stuck, I don't even have a WAG without looking inside.  Butt - If you left the hammer in the gun and the .... nope. not even a guess without having it in-hand and looking inside.

If Brandy dam'd New, the Barrel Breach may be jamming against the Cylinder Face, stopping  rotation.  Or yer just not holding yer tongue just right, maybe.