Blakeslee Quick Loader

Started by Niederlander, November 02, 2022, 06:03:17 PM

Previous topic - Next topic

Niederlander

Gentlemen, How is the quality of the Blakeslee Quick Loader offered by Blockade Runner?  Are they U.S. made? 
"There go those Nebraskans, and all hell couldn't stop them!"

Jack Wagon

CHECK THE SORI UNDER ACCESSORIES, LOTS OF INFO ON BLAKESLEE QUICK LOADERS. I'VE HAD A BR BOX FOR MANY YEARS AND LIKE IT. THEY SAY MADE IN THE USA.  Jw
Jack Wagon
Member NRA
Member #358 SSS

Jim W

I realize this isn't the one from Blockade Runner, but this is what I thought of the one from Coon Creek:

https://www.cascity.com/forumhall/index.php?topic=66499.msg783949#msg783949

kendudley

working on upgrading my box now with tube tops....3/4 inch copper pipe fits perfectly,  epoxy drying now.
   
did the original tube have any kind of coating.  black japanned?  painted?
looking at a cold galvanizing spray paint too...
    I want to make it neat and all the same color.  I'm anal..I know.
etc.  Ken

kendudley

OK, here is the final.  I cut 3/4 inch copper pipe,  perfect tight slip fit over the tubes.  rounded, sanded etc.  epoxy in place.
  then coated with Home depot zinc coating paint. 

   The tubes were flush to the top, hard to grasp, cut a 1 inch piece of wine cork pushed inside raided them up.
  the leather cover fits it all perfectly

don't laugh, I have the flu and am stuck in the house for a week.  Ken
PS use a black permanent marker to darken the white thread.

El Supremo

Nice looking work, Ken:

Haven't seen that version of tubes.
Do the ends fit into the butt cavity for loading, please?
Tx.
El Supremo/Kevin Tinny
Pay attention to that soft voice in your head.

kendudley

I  have a picture of an original.  too bad I cant post it.  'too large'  ??    It looks the same as the one I did.
   They seem to work fine.  push against the butt and they all fall in.  the tubes are fragile and ends bend easily so this protects them and
'looks good too' 

    again.  one week with the flu and wife is visiting family for a few days. so I'm stuck doing things like this....HA  Ken

and one more final note.  I darkened the WHITE threads using black shoe polish. 
   I just used a black indelible magic marker and three minutes later they are black and permanent
DUH.       

© 1995 - 2024 CAScity.com