Show Off Your Non-Cowboy Stuff Here

[GunClick Rick]

KERPLUNK!!!! i passed out.i'll make a comment when i wake up~




Oh wha,who,all i saw was a flash of bueaty,what was it?? OH KTs new knife and sheath,i only thought god could do som,uh oh,KERPLUNK!!!

[Camano Ridge]

KT, Beuatiful. How thick is the damascus billet on the sheath. seams like that would bea pretty weighty outfit.

[KidTerico]

Thanks everyone. Camano I sanded the back side down so it is about 1/32 of a inch. KT

[KidTerico]

Randy that's really NICE. KT

[KidTerico]

Another knife made by my friend Wade Hougham  Gator jaw bone, KT

[GunClick Rick]

Beun ov sownd mined and bodee wheen i leeve thiss wurld,i doo bekweeth tu mi indiun frind knone tu bee Kid Terico wone set
ov botum jaw boenes tu be dune up as machin deemaskus nifes,tu bee hangd up on his kaben wawl whin he seees ffit,i rekin thay wil
luuk rite purty!!

gunklik rik

[Red Cent]

[KidTerico]

I just want to show my new knifes from Terry knipschield, sharp as h*ll. Just have to learn to handle the headknife, it's my first one.

Beautiful work    KT

[Marshal Will Wingam]

KT, Nice knives. You going to make sheaths for both? I put one on my round knife so I could move it around without slicing everything up. The one from Wade should get a gator hide something-or-other.

Red, nice shoulder rig. It fits the whole thing perfectly. Good work.

[Pappy Hayes]

Not sure this will be seen but I have an order to make an ankle holster. I have the holster pattern done and the leather holding piece. My problem is I cannot come up with the strap to wrap around the leg.  Anyone made one here and can tell me what you used?

[St8LineLeatherSmith]

wide elastic and velcro sewn to the holster

[GunClick Rick]

Like them things in the 30s that held your socks up~

[44wcf]

I needed a new hat band and wanted to loom bead it as that is something I'd yet to try.
But I didn't have a loom so I made an early native bow loom..A willow branch and a couple of strips
of rawhide to hold the threads apart...
I've determined so far you need more hands....Let you know how it turns out......Randy




Here's the end result...I enjoy learning old techniques, might find some more original patterns and make a few more...
I seem to remember "Billie Jack" wearing a beaded hatband.....Randy

Can you explain how you get the beads on the thread?
I am too dense to figure it out.

[Camano Ridge]

Pappy it would be easier to give you some ideas if we could see what you have so far. Here is a pattern and tutorial for an ankle holster. I realize you have the holster made however this might give you some ideas for carring on the ankle. http://leatherworker.net/forum/index.php?showtopic=16233&st=0   I have used velcro also webbing with quick release buckle. I prefer the large elastic band with velcro closure similar to what is in the tutorial.  I use 4" elastic. If you have a piece of leather backing you are mounting the holster on I would stitch a piece of wide elastic to each end of the leather backing piece then stitch velcro the hook piece to one piece of elastic and the  loop piece   to the other peice of elastic. The tutorial shows using a piece of shearling on the backing piece against the ankle, I have also used foam.

[St8LineLeatherSmith]

a bead loom

[St8LineLeatherSmith]

oops beat me to it
BTW churchandson that there is a dandy bead loom you have there
Thanks for showing, I would have never thunk it
is the spreader bars just rawhide?

[44wcf]

a bead loom

Thanks, I would never figured that out.

[St8LineLeatherSmith]

you can get bead loom kits at wally world for about five bucks.

[Arizona Cattleman]

My latest.  This one is for me, and is very comfortable despite its size.  It is a middle of the back holster for a 1911.

AC

[Marshal Will Wingam]

Looks good, AC. Thanks for sharing.