Reproduction Spencer Rifle

Started by RattlesnakeJack, February 19, 2012, 04:39:21 PM

Previous topic - Next topic

RattlesnakeJack

Well, I seem to be up to my usual silliness ....

As if I haven't spent too much on guns (if that is possible) my hankering to have a reproduction Spencer rifle (or carbine) is returning.  (Some of you may even recall my abortive attempt to buy a Spencer carbine from Marshal Halloway a few years ago ....)

Anyway, the urge is back.  I am doing my best to resist ..... but can't predict the outcome.   ::)

Since the GAF website seems to be presently "for let", I can't review the standards for "Battle Rifles" - so my question is this:  would I have to hold out for one chambered in 56-50 (albeit the centerfire version) or would it be permitted as "MilSpec" in GAF if chambered for one of the substitute cartridges, such as .45 Colt?  (One dealer in Canada currently has one of the rifle-length repros in stock, but it is chambered for .45 Colt .....)

Although I do lots of reloading for it already, in one sense .45 Colt is actually less attractive to me, because I gather that the magazine tube will only hold 7 rounds in that chambering, whereas it will apparently take 8 of the stubbier .56-50 cartridges!

This hankering has been renewed because of involvement in some recent discussions and communications about the Model 1865 Spencer rifles (2,000 of them) and carbines (2,300 of those) acquired by Canada in 1866 so it could arm at least some of its Militia Battalions with breechloaders to meet the Fenian Raids threat.  As many of you are aware, I already do an 1885 Queen's Own Rifles of Canada impression, and the QOR were one of the units armed with Spencer rifles in 1866.  Here is the cover of  the november 1986 issue of the Canadian Journal of Arms Collecting, which had an article on these "emergency breechloaders" - the rifle on the left is a Canadian Contract Peabody (Canada also acquired 3,000 of those at that time - indeed, I already own an original Canada Militia-marked Peabody.)  The studio portrait is of a circa 1866 QOR rifleman, with his Spencer rifle -





Wouldn't this be a great excuse for a new uniform and related kit?   ;D
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

Drydock

All reproduction Spencers in all calibers are currently allowed.  The .56-50 will only hold 7 in the magazine BTW, same as the .45 Colt. 
Civilize them with a Krag . . .

Niederlander

Jack,
    I've had some experience with both.  I'd go with the .56-50, not only because it's more authentic, but they seem to be more reliable.  Some of the early .45'd had problems with the extractors, but they've probably got that fixed by now.  The thing I found to be vital in getting a Spencer to work reliably is to operate the lever like you mean it.  If you try to baby it, the cartridges tend to hang up.  Good luck in getting a Spencer!
"There go those Nebraskans, and all hell couldn't stop them!"

Pony Racer

RJ - I like your way of thinking.

Now that I am leaving my R&S revolvers as C&Bs for now.  I will probably get back to my hankering for a pre WWI french outfit and finish my kit (I have most of the leather already) to go with my French 1873 St Etienne revolvers.

I already have a pre-early WWI Berthier carbine, but routinely keep an eye out for a nice shooter grade lebel or an early single shot 11mm rifle.

My oldest sister's husband is a former french national & retired soldier.  His family in the southern country side of France would get a great kick out of seeing one of their american family all dressed out in a french army set-up.

PR
GAF 239
Pony Pulling Daddy
Member Fire & Brimstone Posse
Having fun learning the ways of the cowboy gun
WAHOOOOOOOOOO YEHAWWWWWWW

S. Quentin Quale, Esq.

I had a Spencer carbine repro for several years in .45.  I never shot it "competitively" but did plink around with it.  I did not suffer any operational problems that were not caused by the "primary actuator" (i.e., me).   ;)

It's my experience that the mechanism must always be operated "with authority."  If you "limp wrist" it it will not function correctly (usually a failure to eject).  This one had the modified "two prong" ejector (I'm not a Spencer expert so I may not have the terms precisely correct).  You don't have play "Incredible Hulk" with it but you can't "baby" it, either.  You have to operate it with a purpose and it will do just fine.

I sold it a year or so ago as I was not using it and needed the funds for other "toys."  It was a fun gun to shoot. 

SQQ

Delmonico

If it were me Jack I'd wait for the 56-50, just seems right. 
Mongrel Historian


Always get the water for the coffee upstream from the herd.

Ab Ovo Usque ad Mala

The time has passed so quick, the years all run together now.

FTrooper

I am going to agree with Del and the others.

I just bought one and went with .56-50, I debated .44-40 and .45LC for a long time, the pros and cons of each and while doing the research the most common thread was that almost everyone who buys a .44 or .45 eventually sells it off for a .56-50.  As I shopped for used ones that thread became apparent as most people I found selling the .44 or .45 did so because they bought a .56-50!  Now there are a few ferociously loyal to their .44 and .45, but I figured than since the trend is to upgrade anyway, and now that I need to get into reloading for my .50-70, that I might as well get the .56-50 and dies sets.

That's just me though.

Chris Fischer
F-Troop
Chris Fischer
F-Troop

RattlesnakeJack

Thanks for all the responses!   

My first preference is definitely 56-50, but I have a nagging fear that I may not be able to get one in Canada.  Some of you may recall my abortive attempt a few years ago to purchase a 56-50 carbine from our host here in Cas City, Marshal Halloway.  He got me a mould, brass and loading dies, and tried shipping ithe whole package to me twice, after jumping through hoops to get the necessary paperwork in order.  Both times, it was bounced back to him by U.S. authorities, due to the restrictions on exporting firearms of .50 caliber and larger ..... an odd little restriction enforced by the Dept. of State (not BATFE).  Ultimately, he could not get this export exempted from the restriction (which is really aimed at the stuff chambered for .50BMG and such, of course) and ended up having to refund my money.

I could soon be "up and running" with ammunition for a 56-50 Spencer, because I consoled myself by spending the refund from Marshal H on the original Peabody with Canada Militia mark mentioned in my first post.  It is chambered for the very similar Peabody .50-60 rimfire cartridge, and I have it fitted with a one of the 'New Old Stock" breechblocks Dixie used to sell, converted to centerfire.  I load shortened .50-70 brass in a set of .50-70 dies obtained expressly for it, but do not shoot it a lot.  If I can get a 56-50 Spencer, I would simply have to get a separate batch of brass, as I understand that the Spencer cartridge is a bit shorter.  (Interestingly, records show that when Canada had both Spencer and Peabody rifles on issue, they issued only Spencer cartridges, which apparently functioned fine in the Peabody .... albeit with less than stellar accuracy, due to excessive 'bullet jump', apparently.
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

Niederlander

Jack,
      I really hope you can get a .56-50.  I used to shoot one occasionally in our local cowboy shoots, and they really smack the steel targets with some authority!  As an aside, after handling both the rifle and carbine, I really prefer the rifle.  It's still not overly long, and it helps to have some of the weight out in front.  I believe Custer's Spencer-armed cavalry at Gettysburg actually had rifles, not carbines, statues notwithstanding!
"There go those Nebraskans, and all hell couldn't stop them!"

Cowtown Scout

Jack
Several years ago I got a carbine in .45 schofield and all the components to load that caliber but just never got around
to working up a load. Also have a pair of schofield revolvers that I need to shoot sometime also.  One of my goals this year
is to finally get both the carbine and revolvers working with some home rolled schofield ammo.  The carbine is supposed
to hold 8 of the schofield rounds. You might check out the Spencer board here in CAScity.
Scout
GAF #510, STORM #98, GOFWG #126, SSS #211, SBSS #1713, CVV
Life Member: SASS, LSA, ORA, Whittington Center, LSFSC, Founders Club (Gold)
Benefactor Member: NRA and TSRA, Past President TSRA

RattlesnakeJack

Quote from: Niederlander on February 20, 2012, 09:18:14 PM.... As an aside, after handling both the rifle and carbine, I really prefer the rifle.  It's still not overly long, and it helps to have some of the weight out in front.

Yes, despite the greater cost I am really leaning toward the rifle, which is clearly what was issued to The Queen's Own Rifles - or to one of them, at least!  I shouldn't have any difficulty with length .... not exactly being a 'small' individual, as you know! :-\

Although I don't think that the Peabody and Spencer rifles are quite the same scale in the cover image above, by measurement my Canadian Contract Peabody rifle is 55" OAL - which is 8" longer than the Spencer rifle.
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

RattlesnakeJack

Well, Gentlemen ......

I can confirm that, as of today, a Cimarron Firearms dealer located about 90 miles west of me has managed to get the last .56-.50 rifle they had in stock included in the next order being shipped to him!
Quote"I am expecting shipment mid March at the latest."
;D    ;D    ;D

By the way, this screen shot from the Armi Chiappa website shows where I got the understanding that the .56-.50-chambered arms have a magazine capacity of 8, versus 7 for those chambered for pistol cartridges (their specs for the carbine also say "8+1" for .56-.50, and "7+1" for the other chamberings .....)



However, Cimarron's website does say 7 for all versions .....  ???
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

RattlesnakeJack

Another question:  does anyone know what rate of twist the rifling has on these?

I saw a post somewhere which said that only the .44-40 Spencers had a slow enough rate of twist for good long range accuracy, but I hadn't really heard that from anywhere else.

If anyone here happens to know, I'd be obliged.  Meantime, I guess i better go sign up on the spencer forum and commence to learning' .....
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

Cowtown Scout

Quote from: RattlesnakeJack on February 24, 2012, 09:27:31 PM
Well, Gentlemen ......

I can confirm that, as of today, a Cimarron Firearms dealer located about 90 miles west of me has managed to get the last .56-.50 rifle they had in stock included in the next order being shipped to him!  
;D    ;D    ;D

Congratulations Jack, let us know when it's in your possession.  Pics will be in order also.
Scout
GAF #510, STORM #98, GOFWG #126, SSS #211, SBSS #1713, CVV
Life Member: SASS, LSA, ORA, Whittington Center, LSFSC, Founders Club (Gold)
Benefactor Member: NRA and TSRA, Past President TSRA

Tuolumne Lawman

Jack, you need to join us on the Spencer Shooters society.  ALL your questions can be answered there.
TUOLUMNE LAWMAN
CO. F, 12th Illinois Cavalry  SASS # 6127 Life * Spencer Shooting Society #43 * Motherlode Shootist Society #1 * River City Regulators

RattlesnakeJack

Quote from: Tuolumne Lawman on April 05, 2012, 08:04:58 PM
Jack, you need to join us on the Spencer Shooters society.  ALL your questions can be answered there.

TL, I joined the SSS a few years ago when I tried to buy a Spencer carbine from Marshal Halloway, but the US authorities kept sending it back to him because he didn't have the right export permit and he couldn't seem to get one ......

I guess I have just gotten used to posting mostly here in the Barracks ..... gotta try to remember there are other boards!  :-\
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

5judge

    One suspects the replica maker's "8+1" .50-56 Spencer capacity is a typo. Saying that, however, during our Civil War, it was discovered that one could fit an extra round in a Spencer's magazine tube by discarding the follower, using a cork to seal the tube, and functioning the action with the muzzle pointed down. But THAT was with people shooting back. Why obsess over eight vs. nine shots? Eight worked fine in the M.1 Garand and is seven more than your Peabody holds!
    For what it's worth, as authentic as your persona appears otherwise to be, one would expect you'd never be quite satisfied with any other than an authentic .50-56 chambering.
    Aside from Spencers, I have and shoot an original Sharps M.1863 carbine and rifle. The carbine is fun, but the rifle, with a barrel a mere eight inches longer than that of the carbine, is just more visually impressive and a novelty on the range. Think: "Spencer rifle".

RattlesnakeJack

Yes indeed!  As mentioned above, I have a full rifle in .56-50 on order ..... could have gotten a carbine (and/or a pistol caliber chambering) more quickly and for less money, but decided to go for the "full meal deal" .....

And just today at a gun show I picked up an original .56-50 rimfire cartridge  with S.A.W. headstamp, same as the Canadian 1866/67 cartridges!  (I already have a 250-pack of Starline .56-.50 CF brass sitting at a friend's place in Montana for pickup ..... I ordered it as soon as I heard they had produced more.)
Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

Major Matt Lewis

I think you should get it and outfit yourself with an Illinois 7th Infantry outfit...Just saying... ;D
Major Matt Lewis
Grand Army of the Frontier * SASS Life * NCOWS * Powder Creek Cowboys * Free State Ranges * RO II * NRA Life * Man on the Edge

RattlesnakeJack

Well, Richard, the rifle has definitely been ordered so if the dealer comes through I'll have it!

Thought the Illinois 7th Infantry had Henry rifles ........

Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier

© 1995 - 2024 CAScity.com