56/56 bullet moulds

[wolflobo76]

I have been using a Rapine mould for my carbine. Mould# 546378. Do any of you have any other suggestions for other moulds that i could try?

[Two Flints]

Wolflobo76,

Don't you mean Rapine 546-375?

You might want to do a search on the SSS home page - just type in Spencer Bullet Moulds and you will get quite a few links . . .

Two Flints

[5judge]

May I heartily recommend the Owsiak .56-56 mould? Mike Owsiak (856-596-0177) makes a two-cherry Spencer mould that is a thing of beauty. His Spencer mould is outstanding, the bullet boasting very generous grease grooves which help address the Spencer-specific problem of under lubrication. He's pleasant to talk to and his turn around time is rapid.

[wolflobo76]

Wolflobo76,

Don't you mean Rapine 546-375?

You might want to do a search on the SSS home page - just type in Spencer Bullet Moulds and you will get quite a few links . . .

Two Flints

thanks Two Flints  will do.   the info on the mould box says 546378  wt 378

[wolflobo76]

May I heartily recommend the Owsiak .56-56 mould? Mike Owsiak (856-596-0177) makes a two-cherry Spencer mould that is a thing of beauty. His Spencer mould is outstanding, the bullet boasting very generous grease grooves which help address the Spencer-specific problem of under lubrication. He's pleasant to talk to and his turn around time is rapid.

I called and talked with Mike  and will be ordering a mould or two from him in the near future.  You are right in that he is pleasent to talk with and taught me a few things.   Thanks 5Judge