Navy Arms 1866 Carbine Instructions

[warbucks16]

Can anyone  tell me where I can find Instructions for Assembly and Disassemly of a Navy Arms 1866 Carbine.

Thanks for any help.

Warbucks 16

[Montana Slim]

Never read any instructions on this ...but I've been taking them aprrt for a number of years. Here's my "nutshell" explaination:
1) loosen the two small screws on the bottom of the receiver, next to the carrier (don't have to remove them...but, loose enough the carrier flops).
2) loosen/remove the lever pivot screw (If step-1 isn't done first, the thread will strip).
3) loosen/remove the small screw that goes through the side plates -the side plates can now be removed. - careful not to drop them or cut yourself.

From there you'll be able to see how it works & what to do next.

If you don't have a good memory, might want to snap pics as you take it down further.

When reassembling, the last step is to finish tightening those two little screws.

Slim

[Abilene]

Hmm, I answered this a few hours ago but my reply seems to have vanished.  So I'll try again.
Here ya go:
http://marauder.homestead.com/Rifles.html