1876 Parts

Winchester Charlie · July 17, 2013, 09:54:50 AM

Dusty,

I brought her back as a 50-95, just couldn't resist the thought of a 50 cal.
As far as the next project...I have a few...I have another '76 I'm putting together for my dad, along with a '92 for him.
For myself, I have a '66 Musket I'm trying to bring back to life. I found it in Peru, in pieces. Missing the wood, mag tube and right side plate. It had been converted to center fire already, so I want to bring her back and re-create the 44 HCF cartridge it fired.
The agony I put myself through

.

dusty texian · July 17, 2013, 10:15:00 AM

Very Cool, I think we have the same sickness, right now I'm working on two 1876 Winchester's one a 40-60 the other a 45-75 a 1873 Winchester in 38-40 ,and my newes't adventure the loading of the .32 Long Colt heeled bullet cartridge . My Brother said a while back ,everything you shoot is obsolete .....What Fun........Dusty

Winchester Charlie · January 21, 2014, 10:00:34 AM

Just thought I would give an update, waiting on a forearm tennon and need to slot the barrel for the mag tube end plug. Then it's off to the range.

dusty texian · January 21, 2014, 01:11:11 PM

That is looking real good WC. Should be a real shooter,,,,,,Dusty

Winchester Charlie · January 22, 2014, 08:24:15 AM

My other 1876 in 45-60, still some time before she is ready to shoot.

Winchester Charlie · January 22, 2014, 08:25:07 AM

A couple of more pics.

Winchester Charlie · January 22, 2014, 08:28:56 AM

I know, I know, this is an 1876 board but I couldn't help my self. My 1892 project, 44-40, factory 19" barrel.

Winchester Charlie · January 22, 2014, 08:29:38 AM

Just a couple more pics.....

dusty texian · January 22, 2014, 08:46:23 AM

Hey WC,that's gonna make into a couple of nice rifles. Is that 92 a factory short rifle. That will be a handy little Dude. I have a 1876 with a cutdown barrel 19.5" in 40-60. Thinking on having it bored out to .45 cal. and chambered to 45-75 wcf. Would make a handy short rifle or cannon.,,,,,,,Dusty

Grizzly Adams · January 30, 2014, 08:23:06 PM

Outstanding work there, WC! Thanks for keeping us in the loop!

Winchester Charlie · April 28, 2014, 09:42:11 AM

Well, it's been a long time coming. I finally took the 50-95 out to the range yesterday just to test fire the old girl. Other than a minor timing issue there were no problems and no misfires.
I was shooting Jamison Brass, WLR Primers, Buffalo Arms 300 grn .510 bullets, with 14 grn of Trailboss.
I didn't go for accuracy or even to get numbers, just wanted to get lead down range and make sure she was going to work. I had a handmade wooden target set up that kept falling over every time I shot at it. Sorry I didn't take any pics this time, but I will next time I go.
I can't seem to wipe the smile off my face!

WC

ndnchf · April 28, 2014, 12:10:13 PM

WC - Congrats! I can only imagine the satisfaction your got from bringing this rifle back from the dead. Good on ya! What twist is your barrel? It will be interesting to see what kind of accuracy you can get compared to the Uberti and Chappy .50-95 barrels. The best my Uberti has done so far is about 1-7/8" group at 50 yards. Not great, but not bad for a rifle of this type.

dusty texian · April 28, 2014, 02:09:45 PM

+1, what ndnchf said, Winchester Charlie.That had to be a great feeling after all the time building up the old rifle. That smile is well deserverd,,Amigo,,,,,,,Dusty

Winchester Charlie · May 01, 2014, 03:01:00 PM

Thanks ndnchf and Dusty, It has been a long road less traveled but well worth it.
ndnchf the barrel is a 1:60 twist Green Mountain Barrel fitted by Nelson Waite at Okeechobee Shooting Sports gunsmith shop, in Okeechobee, FL.
I can't wait to get back out there and really work on sighting it in.

WC