pistol dryer

[delmar]

I wanted to put my 58 in the food dehydrator to dry, but it didn't fit. So I found a big bowl the right size to replace the lid and put a hole in it to run the barrel out of. Some of the hot air will come directly out the hole and some should come up through the barrel.

[litl rooster]

that's got to be tougher than deer jerky to chew on

[Shotgun Franklin]

Or ya might try some of that canned compressed air like ya use to clean your computer with.

[Adirondack Jack]

BOILING water straight out of the tea kettle followed by a good shake works.  A little squirt of canned or shop air after the bolineg water is even better.

[Daniel Nighteyes]

Yet another good reason to have an air compressor in yer shop...

[Adirondack Jack]

Yet another good reason to have an air compressor in yer shop...

Yep.  I have air in the garage, and plumbing the ajacent shop with it is on the short list (combined with a two-way switch so the compressor can be controlled from either building).

[Ten Bears]

Just drop the parts in boiling soapy water, the metal gets so hot,

It dries itself off in seconds.

[delmar]

Just drop the parts in boiling soapy water, the metal gets so hot,

It dries itself off in seconds.

That sounds like it would work, but I like keeping the mess out of the kitchen and I don't have a stove in the
utility room, My wife got the food dyhydrator for $6 at Goodwill, and she never uses it  so I'm good to go. Plus I
already cut a hole in that bowl

[Danny Bear Claw]

...and here I was wondering what it would sound like having 4 pounds of steel bouncing around in there.         

[Angel_Eyes]

Adirondack Jack,,Do you use that tea kettle for making coffee

AE