I have this old gun

GunClick Rick · September 17, 2009, 12:32:52 AM

All done

St. George · September 17, 2009, 12:45:07 AM

Just follow the advice you've already been given about cleaning the piece, and DO NOT have it re-blued.

Disassembly of the Pistole 08 isn't 'that' difficult - but if it's intimidating, then carefully remove the wooden grips, open the action - and spray something like 'Break-Free' inside - to wash any accumulated detritus away.

Let drain well - or blow it out with an air hose - re-install the grips and you can put it away for her.

Vaya,

Scouts Out!

GunClick Rick · September 17, 2009, 12:50:56 AM

I got some other stuff that worked real well on the small amount of rust that was here and there,it actually stops the process and fills in the pitting.Now i wanted to scruber up good.OK Olebuddy ole pard,no reblue.Thank you much..

GunClick Rick · September 17, 2009, 12:59:40 AM

Sent ya an email St. George

St. George · September 17, 2009, 09:08:03 AM

Send a PM.

If you're using something that fills in pitting - what are you using?

Vaya,

Scouts Out!

FriscoCounty · September 17, 2009, 12:00:59 PM

You really are going to want disassemble the toggle assembly and remove the firing pin. You would be amazed at how much gunk can build up in there over time.

GunClick Rick · September 17, 2009, 12:41:02 PM

Sent PM St Goerge..

GunClick Rick · September 17, 2009, 12:43:23 PM

Hey Frisco,i'll be right over,i'll let you do it

I don't trust me...

GunClick Rick · September 17, 2009, 09:09:56 PM

FriscoCounty · September 17, 2009, 09:22:47 PM

No Problem. But, I gets to keep any 'left over' parts.

GunClick Rick · September 18, 2009, 02:33:54 AM

I'll bring some