New Paul Jones Spencer Mould

[Fox Creek Kid]

It seems as if the legendary mould maker Paul Jones now has a Spencer mould. FWIW, people say his moulds are without peer and for $160.00 w/o handles they should be! 

It looks like a misprint on the weight. I'll bet it really is a 335 gr. & not 535 gr. 

http://www.pauljonesmoulds.com/50_caliber.htm

[Two Flints]

Fox Creek,

I contacted them and am waiting for a reply to your question on bullet weight.  I'll post what I find out.

C'mon Fox Creek, you can afford that mould

Two Flints

[Fox Creek Kid]

It looks like a copy of Larry Romano's Spencer bullet IMO.

Two Flints, I haven't even cast a slug yet from the DW two holer I bought last year.    I am really happy with the Rapine 350-T for CAS as you don't really need the full 45 gr. of FFg hitting the targets like an Abrams Tank!! 

[Tuolumne Lawman]

I started using about 42-43 grains FFG 777 with the HRHW/DWM mold.  Very warm load.  Knocked over the target at the match.  Backed down to about 39-50 grainsss.  A little tsmer, but around the same as 45 grains Goex.

[Appalachian Ed]

It does look like the Romano mold, just heavier. The base is thicker than on his mould.


-Ed

[Fox Creek Kid]

Talked to Paul Jones & bullet weighs approx. 385 gr. and is for original groove 56-56, i.e., 0.520 something. 

[Two Flints]

Thanks Fox Creek! for the information

[Arizona Trooper]

Do you mean 56-50? 56-56 should be ~.535" - .540" diameter for an oringinal.

[Dai.S.Loe]

Do you mean 56-50? 56-56 should be ~.535" - .540" diameter for an oringinal.

In which case does anyone know where I can get a mould for this

I have an original Ballard carbine that needs to be fired occasionally.

[Fox Creek Kid]

Call him. He didn't know offhand as he was sort of busy and the mould is new.