Who makes

Started by Andrew Quigley, October 18, 2006, 12:10:48 PM

Previous topic - Next topic

Andrew Quigley

a hollow base wadcutter bullet mold in 38. Or just a hollow base mold for a 38 cal. I like to mold my own but can't seem to find a mold. Anybody know who makes one or a used one forsale?
Buy American as the job you save might be your own!


Andrew Quigley

Ottawa Creek Bill

Amdrew,
Buffalo Arms Co. out in Ponderay Idaho www.buffaloarms.com, sells both a .44 and a .38 hollow base bullet, Rapine makes the molds which they also sell.

OCB
Vice Chairman American Indian Council of Indianapolis
Vice Chairman Inter tribal Council of Indiana
Member, Ottawa-Chippewa Band of Indians of Michigan
SASS # 2434
NCOWS # 2140
CMSA # 3119
NRA LIFER


Andrew Quigley

At 26.95 per hundred I remember why I want to cast my own!  Looked at the Rpine molds they sell but didn't see a hollow base one at all. Like to have the one that cast there pure lead 150gr rn.
Buy American as the job you save might be your own!


Andrew Quigley

Ottawa Creek Bill

Andrew,
If you look next to the bullet it shows the bullet mould used #358150HB, I believe this is a Rapine mould (you may want to call them, (I'm not sure they have a web site) and it is the .358, 150 grain hollow base bullet.

OCB
Vice Chairman American Indian Council of Indianapolis
Vice Chairman Inter tribal Council of Indiana
Member, Ottawa-Chippewa Band of Indians of Michigan
SASS # 2434
NCOWS # 2140
CMSA # 3119
NRA LIFER


Sir Charles deMouton-Black

Didn't I hear that RAPINE was demised?  I looked at my NEI catalogue.  They don't have a HB .358, but there is a useful looking wadcutter, .359-148-DE"  (double-ender) #138.   Now if Nei could be persuaded to fill the void!??  (Or make a void - LOL!)
NCOWS #1154, SCORRS, STORM, BROW, 1860 Henry, Dirty Rat 502, CHINOOK COUNTRY
THE SUBLYME & HOLY ORDER OF THE SOOT (SHOTS)
Those who are no longer ignorant of History may relive it,
without the Blood, Sweat, and Tears.
With apologies to George Santayana & W. S. Churchill

"As Mark Twain once put it, "History doesn't repeat itself, but it does rhyme."

Ottawa Creek Bill

Sir Charles...
You're right!! Rapine has stopped their dealership program...., (it seems the boss is getting up in years and he wanted to turn it over to his children, but they wanted no part of it....too bad),  But!, you can still get their moulds made if  you call direct at...215-679-5413...  I talked to them this morning and it took me forever to get someone to talk to. Rapine will make any mould for you they've made in the past as long as you have the # of the mould.

Now for NEI....., NEI will make you a double cavity 358 Hollow Base mould (even though its not listed in their catolog) , for $110.00. plus $8.00 shipping, you can call them direct at 915-772-0259, ask for Joel. Sounds like a bargain to me!!!

OCB
Vice Chairman American Indian Council of Indianapolis
Vice Chairman Inter tribal Council of Indiana
Member, Ottawa-Chippewa Band of Indians of Michigan
SASS # 2434
NCOWS # 2140
CMSA # 3119
NRA LIFER


Capt. Augustus

When I made my conversions I considered a Rapine mould, lets see $80 = a lot of Hornady HBWC - cost of lead - time.

Andrew Quigley

Got lots of lead and I cast all my own bullets anyway. :)
Buy American as the job you save might be your own!


Andrew Quigley

© 1995 - 2024 CAScity.com