Ejector spring got bent ...

Started by Matthew Duncan, January 16, 2006, 12:14:20 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Matthew Duncan

January 16, 2006, 12:14:20 PM
Ejector spring got bent upward on my '66.  Spent brass wouldn't eject unless I put a little downward pinky pressure on the ejector. I'm not sure if I short cycled the action or Ejector just wore out.

I've got a punch set backordered.

Replacement Ejector Spring arrived this morning.

Looking from the top do I drive the pin out from the left to the right, or does it really matter?
Major General J.E.B. Stuart's Division
Captain 1st Maryland Artillery, C.S.A.
SASS# 23189

Disclaimer:  I have not slept in any hotel recently, not a certified CAS rule web lawyer.  Have not attended any RO III or RO VI classes.  Opinions expressed are by a cowpoke who believes the year is 1868.

Matthew Duncan

#1
March 10, 2006, 02:46:10 PM
Fixed. 

Had to file a bit off the top of the new ejector but the old '66 is back on line.
Major General J.E.B. Stuart's Division
Captain 1st Maryland Artillery, C.S.A.
SASS# 23189

Disclaimer:  I have not slept in any hotel recently, not a certified CAS rule web lawyer.  Have not attended any RO III or RO VI classes.  Opinions expressed are by a cowpoke who believes the year is 1868.
Print
Go Up Pages1
User actions
© 1995 - 2024 CAScity.com