silver frames

Started by KWK, March 22, 2021, 12:27:07 AM

Previous topic - Next topic

KWK

The Uberti factory site shows a gorgeous '66 with a hand engraved "solid silver" frame. Years ago I saw on their site a page mentioning they had made a small run of silver framed '66, but that's no longer there. I recall the page said the run (of 10 I think it was, with one still for sale) had been inspired by an original Winchester. Anyone here know the history of those Uberti rifles and the original(s) which inspired them? A web search found examples of silver and of German silver frames on original Winchesters, but nothing on the Ubertis.
Karl

Coffinmaker


:)  KWK   ;)

A tiny tidbit more information.  The run of rifles of which you speak were in fact a near Solid Silver alloy.  The "alloy" was to bring the silver receiver up to the same tinsel strength of Uberti Brass rifles.  The rifles were made to be replicants of a "presentation" rifle, made for the President of Mexico.  At the time of the article, "Silver #7" was in fact still available.  The price at the time was 28,000 USD.  Priced for a quick sale   :D  The Receiver, Butt Plate and Fore End piece were all in the Silver Alloy.

Stay Safe Out There

KWK

Thanks. I remember vaguely the original was for some South American government official but didn't recall it was Mexico. II imagine Winchester was hoping for a big military contract.) Nor do I recall seeing a price, but $28k is rather impressive. At the time, I did look up the properties of various silver alloys and found several with suitable tensile strength, which surprised me since silver isn't very strong. Also, the weight of the silver in the frame was only a few hundred dollars at that time, which also surprised me.

My thoughts were that a decent aluminum alloy would today make for a nice '66, especially when combined with the more slender barrel tapers Miroku uses on their '66 and '73 pattern rifles. While it's strong enough, there is the question would it be stiff enough in such a long frame. Boing
Karl

Abilene

I think Cimarron has one of those, given to Mike by Aldo.  I saw it on the show gun shelf a few times, but it never went to any shows.  Mike also has a silver plated original '66.
Storm #21   NCOWS L-208   SASS 27489

Abilenes CAS Pages  * * * Abilene Cowboy Shooter Youtube

KWK

Yesterday I talked with Taylor's about wood and engraving options for the '66 and '73 Uberti, and before hanging up I asked about those silver '66. They are still available for order--for $48,000.

The money must all be in the magnificent engraving, inlay, and wood on these. It isn't in the silver, of which I calculate there is about $1000 at current prices.

Gunmetal would do nicely, thank you.  ;D
Karl

St. George

You don't cost out the price of the silver - you pay for what they did with it.

Scouts Out!
"It Wasn't Cowboys and Ponies - It Was Horses and Men.
It Wasn't Schoolboys and Ladies - It Was Cowtowns and Sin..."

mtmarfield

      Greetings, All!

   On the subject of Silver... I feel that a Brass - Framed Henry, tastefully covered in Samuel Hoggson-esque
engraving, then all Brass thoroughly silver plated, would be Positively Wonderous!
   Oh, and also chambered for the ".44 Colt"...!

                         M.T.Marfield

Coffinmaker


:)  M.T.  :D

I am right there with ya.  However, my preference is for the chambering to be 44 Russian.  Heck, I'd even settle for the Brass to be Nickel Plate.  Some kind of tasty you betcha.

Stay Safe Out There

KWK

Silver plating is an option at Uberti, as shown on the factory site. I'd worry how plating would hold up.

When I saw their picture of the solid silver '66, I first considered electroless nickel to get a similar effect, then my mind drifted off to aluminum and a lightweight '66, then I decided gunmetal would do.

I do wish Uberti offered the lighter rifle barrel contours originally available. At least with the '73 you can pick the half found to reduce the nose heaviness in the 24" models. Taylor's said Uberti won't fit such to a '66, even though the parts interchange. Neither does Uberti offer a half magazine. The Miroku replicas use a contour much lighter than the originals and balance nicely for me, but they are out of production. I'll keep my eyes open for one used.
Karl

KWK

Hurry, hurry, step right up and get your bid in!

Hey, the front of the carrier is a bit proud, just like many Uberti I've seen, although the Uberti were proud all the way across.

edit: Oops, I missed that the auction had been completed. It sold for nearly a million dollars. It's not that nice.
Karl

© 1995 - 2024 CAScity.com