Tumbling dry

Started by RRio, August 29, 2020, 12:44:53 PM

Previous topic - Next topic

RRio

I've got a vibrating case cleaner that I have been cleaning my .45 cases with just dry media (walnut shell) . Do I need to add anything to it? ???
"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

Abilene

Need to?  No, unless you want it more shiny.  There are various polishers that folks add.  I've heard of Mother's Mag Wheel Polish.  I sometimes add Brasso, although I let it run for a while after adding the brasso both to get it well distributed in the media without clumping, and to let the ammonia evaporate, before adding brass.

As a dedicated brass picker, I will say that shiny brass is definitely easier to see!   :)
Storm #21   NCOWS L-208   SASS 27489

Abilenes CAS Pages  * * * Abilene Cowboy Shooter Youtube

RRio

Thank you, Abilene.   ;)
"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

Coffinmaker


:)  RRio   ;)

Well Shucks.  Ima Luddite.  No, really, it's true.  Luddite thru and thru.  I don't care if my brass is Brite and Shiny.  I also don't really subscribe to many of the concoctions folks dump in their media in search of "like new."  There.  See.  Luddite.

First understanding I shoot APP (BP Sub for those whom live under rocks) and after shooting, I rinse the brass in Warm Water and White Vinegar.  After drying (small oven) I dump about a cap full of Dillon Case Polish (if I remember) in with the Lizard Litter (Walnut Shell) and then tumble, essentially dry for about an hour.  DONE.

Shiny is not necessary for loading and shooting.  Shiny is only an issue for those suffering a form of OCD about brass looking "Like New."  Clean is necessary.  Anything after Clean is "Cake."  Oh, and some stains on yer brass lets folks know you really do shoot alot.  Burma Shave

Hide and Watch

Lucky R. K.


I put about two teaspoons of mineral spirits(paint thinner) and two or three teaspoons of water into my walnut media. I put the brass into the tumbler wet after rinsing with soapy water. Vibrate until the media is dry, about four hours or so. The brass will be shiner than new.
Lucky
Greene County Regulators       Life NRA             SCORRS
High Country Cowboys            SASS #79366
Gunpowder Creek Regulators   Dirty RATS #568

The Wind is Your Friend

RRio

"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

Professor Marvel

Quote from: Coffinmaker on August 30, 2020, 09:38:02 AM
:)  RRio   ;)

Well Shucks.  Ima Luddite.  No, really, it's true.  Luddite thru and thru.  I don't care if my brass is Brite and Shiny.  I also don't really subscribe to many of the concoctions folks dump in their media in search of "like new."  There.  See.  Luddite.

First understanding I shoot APP (BP Sub for those whom live under rocks) and after shooting, I rinse the brass in Warm Water and White Vinegar.  After drying (small oven) I dump about a cap full of Dillon Case Polish (if I remember) in with the Lizard Litter (Walnut Shell) and then tumble, essentially dry for about an hour.  DONE.

Shiny is not necessary for loading and shooting.  Shiny is only an issue for those suffering a form of OCD about brass looking "Like New."  Clean is necessary.  Anything after Clean is "Cake."  Oh, and some stains on yer brass lets folks know you really do shoot alot.  Burma Shave

Hide and Watch

Ah My Dear Coffin!

the wealth of sources for off-topic comments you provided is too good to pass up!

Firstly, and on topic, I agree, "shiny is not necessary"  and "clean is good enough".
Green is bad, Clean is good, a little tarnish is ok (watch for weak spots and cracks).

technically and metallurgically,  cleaning TOO well does actually thin the brass minutely each time.
and theoretically, a thin layer of normal dull  brass oxidation may help in terms of longevity (note the patina on brass frame guns)

Off Topic-
Heavenly Carbuncles! Coffinmaker Admits to Shooting Cartridges!

Coffinmaker The Luddite
- Do you have the appropriate Wooden Shoes ( Sabots  ) ? 
   Have you ever kicked them into moving machinery ( Sabo-tage ) ?

yhs
and amateur historian
who often gets it wrong anyway
prof marvel

Your Humble Servant

praeceptor miraculum

~~~~~Professor Algernon Horatio Ubiquitous Marvel The First~~~~~~
President, CEO, Chairman,  and Chief Bottle Washer of


Professor Marvel's
Traveling Apothecary
and
Fortune Telling Emporium


Acclaimed By The Crowned Heads of Europe
Purveyor of Patent Remedies, Snake Oil, Powder, Percussion Caps, Cleaning Supplies, Dry Goods,
and
Picture Postcards

Offering Unwanted Advice for All Occasions
and
Providing Useless Items to the Gentry
Since 1822
[
Available by Appointment for Lectures on Any Topic


Coffinmaker


:)  My Good Perfesser   ;)

Or . . . Is it perhaps "Confesser??"  Whom knows what Evil Lurks . . . Yes.  Yes, I must admit I have been known to utilize Suppositories.  There is a reason.  Once, Some Lustrum ago, I showed up at a CAS Match with 12Ga.  Yep, a Modern reproduction 12Ga Muzzle Loading Shotgun.  Nobody noticed until I went to the Line and hit the second pair of Shotgun Targets and began to re-load.  Six shotgun target stage, move between pairs.  After laughing digressively, all decided I shouldn't use the Front Stuffer.  Really Slows up the "action" part of Cowboy "Action."  This brought about my conversion to All Brass Shotgun Hulls.

I must also confess (Fallwell ism) to having dallied with "other" Suppositories upon occasion.  I found the same reluctance by "others" to embrace shooting a Hawken Plains Rifle for 10 Round stages.  No sense of humor atall.  Of needs one must.  I also found some complaint the occasion I brought a pair of Dueling Pistols.  See the pattern??  No Sense of Humor.  No appreciation for Fine Firearms atall.

So, of needs must, I confess.  Biteing, Kicking, Clawing, Screaming, I have been dragged into a relationship with those Fad, Heathen Suppositories.  Also, of needs must, learned the care and feeding of same.  Harumpff!!

Hide and Watch

Crow Choker

I've been tumbling dry with walnut and corn cob media as long as I've been reloading metallic brass cat-ridges in 1976. I've always added various media boosters when the media seemed to get a little tired and didn't need to be tossed. It will get sort of worn out and dirty after a time and need to be changed. Coffinmaker doesn't like the dirty Ol black powder, but likes his brass dirty----figure that one out.  ??? :) I likes me brass clean, doesn't have to be hot off the press factory shiny, although the brass I use in my conversions shooting black powder have sort of a patina to them. Soak and rinse in hot water, then they get tumbled. I don't leave them in the tumbler so they get super shiny, but they're clean. There is all kinds of 'kitchen formula's' on the web for media additive, same as there is a multitude of commercial stuff on the market. Ya gotta try here and there to find what works best for ya and satisfies yer expectations.  ;D
Darksider-1911 Shooter-BOLD Chambers-RATS-SCORRS-STORM-1860 Henry(1866)-Colt Handgun Lover an' Fan-NRA-"RiverRat"-Conservative American Patriot and Former Keeper & Enforcer of the Law an' Proud of Being Both! >oo

© 1995 - 2024 CAScity.com