Feeding Improvement in Armi Sports 56-50 Spencer - *** Added to SORI #17 ***

[Herbert]

take it of the radious

[El Tigre]

Hello El Tigre.. One other thing, I made sure where the mark is, top whould be the chamber, bottom would  be the block. I took the cartridge from mine out after it hung and the mark is on the bottom, so I think its not on the chamber of mine. Lowering the cam may not fix that but it could if its the angle going into the chamber and the mark was on top. If that makes since? But all in all mine is smooth, sometimes I have to wiggle it a little or tilt it down. Loco

I will compare the situation with my original Spencer I bought on weekend. The feeding of the original one is much more better and there must be a reason

[panhead pete]

Herbert,

Thanks for the info!  I will try to fix'er'up next week!!  Will be a better main match rifle with better feeding for sure.

Panhead

[Crazeyiven]

Any photos or drawings of the rocker/cam modification?

deg

[Crazeyiven]

Two Flints-

There is a comment below about the one turn in 36 inches barrels instead of one in 24 inches.

Is there a source for one in 36 inch barrels?

Thanks,

deg

[El Supremo]

Hello:
Larry Romano, of Romano Rifle Company, also known as Alamo Gun Shop, in Pennellville, NY can provide just about any reasonable twist rate.
Regards,
El Supremo/Kevin Tinny