proper shotgun shell belt?

Started by Flatbush, February 25, 2015, 01:35:33 PM

Previous topic - Next topic

Flatbush

Hey Fellers,

New member gearing up here and I was wondering if this shotgun shell belt would pass muster.
I'm sure the belt itself is fine, but I'm wondering specifically about the leather strip under the individual loops to keep the shells from sliding down too far.

http://www.jaxleather.com/ShotgunBelt%20w%20Stop%20%20142%20lg.jpg

Thanks,

Flatbush

Will Ketchum

I don't see why not, it is similar to those in "Packing Iron" worn by both John Slaughter & Teddy Roosevelt. Personally I prefer those with a Mills buckle which can be acquired at many CAS suppliers.

Will Ketchum
Will Ketchum's Rules of W&CAS: 1 Be Safe. 2 Have Fun. 3  Look Good Doin It!
F&AM, NRA Endowment Life, SASS Life 4222, NCOWS Life 133.  USMC for ever.
Madison, WI

OklaTom

Looks fine to me.  Key is the correct material (check) and the correct single shell loops (check).
"I druther have a pocket full of rocks than an empty gun..."

OklaTom@att.net

Johnny McCrae

Thank you Gents for answering Flatbush's question. Flatbush is a fellow shooter and an asset to the sport of Cowboy Action Shooting.
You need to learn to like all the little everday things like a sip of good whiskey, a soft bed, a glass of buttermilk,  and a feisty old gentleman like myself

bushwhacker

Sorry I just saw this.  As everyone has said it looks fine to me.

Flatbush

Thanks for the kind words Johnny,

and thank you fellers for helping a new guy get started down the right track!

Flatbush

© 1995 - 2024 CAScity.com