MOVED: 5-1/2" .45 Colt R-M for Possible Trade?

[Major 2]

This topic has been moved to Classifieds as well to increase views  

http://www.cascity.com/forumhall/index.php?topic=52634.0

Not sure where I should post this, but I figured since someone looking for a gun like mine might be cruising this board, here it is: I have a Uberti .45 Colt Richards-Mason Conversion with a 5-1/2" barrel. I bought it NIB about a year ago, and have used it hard. Have put less than 500 rounds through it, but I've worn it as an everyday farm gun, and it has a lot of holster wear, making it look like quite the working cowboy's gun. I replaced the grips with a new set which I finished with boiled linseed oil. They have been dinged up, and look nicely distressed-very pleasing in appearance I think. I've also fixed the barrel-to-arbor fit as instructed by Pettifogger. It had some timing issues, but has been fixed, and the hammer replaced. I have thoroughly enjoyed this gun, and there's nothing wrong with it- it's just that this poor boy wanted a 7-1/2" Old Model Peacemaker in .44 WCF originally (bought this gun instead-it was cheap) and I've been jonesing for the Peacemaker lately. Wondered if anyone might want to trade? Because I want to shoot BP almost exclusively, I wanted to get into the .44WCF, and want to get out of .45. So,

I have:

Revolver,

Extra Hammer, with boogered cam

Very period-looking slim-jim holster, worn and distressed looking, but very sound and well fitted,

DD-PRS-250 Big Lube six-cavity mold with handles, used

4-die Set of Lee .45 Colt Dies, includes Factory Crimp Die

Handful of brass in varying conditions


I want:

Old Model Uberti or Pietta .44WCF (.44-40) 1873 Colt Peacemaker, with good bore, not concerned about finish condition, as long as there's no pitting or major dings in the metal,

Mav Dutchman .44 cal Big Lube mold, with handles

Set of .44-40 Dies

.44 WCF Brass

Thanks!