45-60 loading problems

Started by leverman, October 18, 2012, 04:31:55 PM

Previous topic - Next topic

leverman

my new to me Ulberti has an issue of sometimes fails to feed the last bullet from the loading gate, they appear to be slightly crooked/at an angle to the lifter, sometimes a hard crank will make it cycle, or I have to square it in the channel of the lifting block, once done all cartriges feed o.k. only seems to happen on the last cartridge loaded through the gate. Have seen the mod for the 73, but not for a 76, brass on the cartridge is scoured so I need to debur all the sharp edges, but is there another mod for the 76 to overcome this problem. leverman ???

wildman1

Make sure that the cartridge is ALL the way in. WM
WARTHOG, Dirty Rat #600, BOLD #1056, CGCS,GCSAA, NMLRA, NRA, AF&AM, CBBRC.  If all that cowboy has ever seen is a stockdam, he ain't gonna believe ya when ya tell him about whales.

© 1995 - 2024 CAScity.com