Armisport customer support contact?

[PvtGreg]

Hi All,

A one time someone here had the name and contact info of someone at the Armisport support center that you could order parts from.  Anyone out there still have that information?

Thanks a lot - Pvt Greg

[Two Flints]

Hi,

His name is Phil Sr. at Chiappa Arms in Dayton, Ohio, if this is who you want?  His Email address is:

info@armichiappa.com

BTW, what part(s) do you need?

Hope this helps.

Two Flints

[PvtGreg]

Hey Two Flints,

Well Saturday when ejecting a stuck case my trusty Armisport Spencer the block and lever "over traveled" and went past its stop.  The rounded edge of the trigger guard had worn down a bit, so when i really had to work the lever hard it over traveled.  The extractor is worn a bit as well so I figure the parts I want are the following:

Part # 49 extractor 770.105
Part # 40 block to lever screw 730.226
Part # 50 cam pin 130.012
Part # 33 trigger guard 790.14

I've found a very good temporary fix by cutting a circle from some .3 in leather and putting it at the bottom of the hole in the lower block where the spring goes between the upper and lower block.  It keeps the upper block from bottoming against the lower block.  It worked well when I had an even more stuck cartridge today at the range.

I'm a bit bummed but I've shot at least 3000 rounds out of that Spencer, plus using it to test the fit of various cartridge substitutes, so I've worked that lever with a lot of force over the last 18 months.

So in the final analysis I'm not too disappointed.  BTW my I didn't resize my new Starline cases as far as I should have, which caused the stuck case issue in the first place.

Pvt Greg

[PvtGreg]

UPDATE:

I know we've had our issues with various Spencers from Armi Sport, but their customer service for parts is great.  Got everything ordered and all of it in stock.