BP cylinder handloader

[Pony Racer]

Here is what a friend made for me to reload cylinders at matches.

Much easier to sit in comfy chair with just the cylinders and reload in comfort.









PR

[Silver Creek Slim]

Interesting.

Slim

[Steel Horse Bailey]

Good friend!

[sundance44`s]

Ya sure can`t slam a freebee , I`ve been useing one like DD sells for a few years now , it does have a much longer reach on the rammer rod to seat a ball on less powder for the wife without useing fillers or those expencive little wads .

[Paladin UK]

Ho PR.......

Innerestin...
Does it `hold still` as ya use it  

Paladin (Whats kinda nosey ) UK

[Pony Racer]

Palladin, as you look at the pix - the cylinder rides on the fixed nob and there is a raised circle where the nipple sits, this spacer locks the cylinder in place while you load. Once a cylinder is loaded you simply rasie the cylinder a little and twist it to the next chamber - let is sit all the way down and repeat.

The loading pin is long enough in my 36 caliber guns that I get a good crunch when using 1 to 1.3 cc of powder with a lubed fiber wad and ball.

the pin could be replaced if needed to a longer or shorter pin - if people like larger/smaller charges.

Due to the sides being flat instead of rounded you can set it on a table and use it or you can sit in chair and use it.

PR

[Steel Horse Bailey]

I believe he could make money with them!

[gregr]

very resourceful

[sundance44`s]

Sure looks like its built to give years of service ..and with a longer reach on the rammer , what more could one ask for ..looks easyer to store than mine too .

[Wwalstrom]

You need to post some dimensions (measurements) !!!