Parts for Euro Arms Remmie

sundance44`s · June 23, 2006, 07:19:31 AM

Anyone know where to buy parts for the Euro Arms Remmies .. i just bought one the other day , and i`d like to order a few spare parts for it .. thanks .

Halfway Creek Charlie · June 23, 2006, 12:29:59 PM

Sundance44's,
Glad to hear of another Euroarms owner. I simply love mine. They fit my small hands great and they shoot good. They have larger Chambers than bore which is always a good thing. Uberti Kirst Conversion Cylinders fit them too!
Here's the best place to get parts.

www.ssfirearms.com

You get a 44 or 36 Cal?.

sundance44`s · June 23, 2006, 01:29:14 PM

Charlie i bought a Uberti 5 and 1/2 barrel 44 remmie off gunbroker and when i called the guy for payment instructions ..he said he also had a new euro arms 44 remmie with an R&D drop in conversion ...hummmmmm i says ..cash is tight ... so he wants to do some horse tradeing .. so i worked up a trade for the euro arms remmie too .. I remembered what you said about likeing the smaller grip frame so i figured the wife might like this one ... the Uberti was for her birthday .. so now she gets 2 ..lol but i did trade off her favorite Pietta in the horse tradeing ........ i`ve tried to get the sxs site up , but i just can`t get it to work right on the gun parts .. he does have the small parts for the euro remmie right ? i`ll just have to call`em . Charlie do you know if the Uberti parts will fit the euro . I`ve got a lot of Pietta parts and i`m sure they are too large .. they won`t work on my small frame ASM eaither .

Halfway Creek Charlie · June 23, 2006, 01:38:32 PM

Sundance44's,
Yes they have all the internals listed in their catalog.....Uberti internals may be the same???
try this link

http://www.ssfirearms.com/download%20catalog.htm

there you can download portions of their catalog.

If this doesn't work call them and ask for Phil. he's an owner and he'll treat you right. Ask him if the Uberti parts interchange

Brand new Euroarms 58's are listed in his catalog at $190.00 though the price may have risen since the catalog was printed.

sundance44`s · June 23, 2006, 01:48:34 PM

Charlie I`ll check the Uberti inards against the euro when they get here .. i`ve got a feeling they might be the same . i knew the new euro`s were in the 190 - 195 price range and this one comes with a R&D drop in to boot .. about 450.00 worth . it took some horse tradeing .. I have already put a uberti drop in cylinder in my small frame ASM ... so this will give me 2 guns with the conversions .

hellgate · June 23, 2006, 03:30:32 PM

Sundance,
When you say "small frame ASM" do you mean a 36 or a 44 Remmie? How about the grips on the ASM, are they smaller than the Uberti or closer to the Euroarms. i.e. does the ASM have a smaller frame than the Uberti? I like the tiny grips on my Euro 36 & 44 Remmies.

sundance44`s · June 23, 2006, 10:41:45 PM

Hell gate it seems like some ASM`s have a smaller frame in the 44 .. i don`t know why ..mine`s a 44 and the grips and frame are smaller than a Uberti 44... in fact i ordered a drop in conversion from R&D and they sent me one for a Uberti with instructions to make it fit the smaller frame of the ASM ... i had to do a little fileing on the cylinder pin window on the frame .. works like a charm though . I`ve heard the uberti drop in will fit fine in a Euro arms .. so the ASM frame maybe smaller ... i`ll compair when they get here .. i only have Piettas till then and the 1 ASM . and i have the Uberti short barrel comming too .

Smokin Gun · June 24, 2006, 02:49:55 PM

Gunslinger, I'll have to check the other parts on my Uberti to see if they fit the ASP/Euroarms 1858's.
The Armi San Paolos(ASP/Euroarms) were were made to be the same size as the original Remingtons. I had the opertunity to compare a Remngton to my ASP at a gunshop and found it to be true.
For what that's worth. I still like um all...

hellgate · June 24, 2006, 04:35:21 PM

Sundance,
I have a R&D drop-in and it does not fit my Euroarms but amybe I would need to do a little filing where you said. Right now the Euro will shoot a whole match without gumming up so I hate to fritz with it. I guess I woll keep my eyes peeled for an ASM if one comes up.

Smokin Gun · June 24, 2006, 05:40:51 PM

Hellgate,

QuoteSundance,
I have a R&D drop-in and it does not fit my Euroarms but amybe I would need to do a little filing where you said. Right now the Euro will shoot a whole match without gumming up so I hate to fritz with it. I guess I woll keep my eyes peeled for an ASM if one comes up

Only a Uberti C&B or R&D, or Kirst will fit the ASP/Euroarms Revs... I talked to the owner at R&D via email and he said to send an ASM Rev and they will put a cylinder to fit in it. Neither make drop in to an ASM.

sundance44`s · June 25, 2006, 06:14:09 AM

Yea i guess R&D only makes the 2 different lenghts in conversion cylinders .. the Uberti drop in... did drop in my ASM ... but it was just a tad too tight .. i figured it would never make 5 rounds going through it with out binding up .. but R&D or Taylors had put a instruction sheet in the box on how to file the inside of the cylinder pin window to give it some relif to make it fit .. i told them when i ordered it ..that i was going to be useing it in an ASM .. so maybe thats why they sent the instructions ..// but then again i remember reading a post that someone said his Pietta cylinders would fit his ASM .. so go figure had me thinking maybe ASM made 2 different size frames in the 44`s . there was no way i could have made a Pietta cylinder fit my ASM .