Wolff type springs in 1875 Remington s?

Started by RRio, December 04, 2019, 12:45:12 AM

Previous topic - Next topic

RRio

Has anyone used the lightened springs in their 1875s or 1890s, any how were the results?
"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

45 Dragoon

  Got no help from here. I've only ever lightened the existing flat springs. For the past year /year and a half though, I've been changing all my customers Remington's over to coil hand, trigger and bolt springs. It definitely allows much more "tuneability" and of course the reliability is "off the chart". I think it's the best upgrade for Remingtons since 1890 !!  I wind the springs myself and the only "drop in" spring is the bolt spring. The trigger and hand take some modification.  I'll put up a "how to" if there's any interest.  I could supply the springs .  .  . 

Mike
www.goonsgunworks.com
Follow me on Instagram @goonsgunworks

Pay Dirt Norvelle

The how to and supplying the springs would be great.  I Now have a pair of 1875s to use for CAS.
PAY DIRT NORVELLE
SASS #90056
NRA ENDOWMENT LIFE MEMBER
COYOTE VALLEY COWBOYS #37
RATS #650

Marshal Will Wingam

I reshaped mine and they really work well. i used a dremel and made all the sanding marks lengthwise so there wouldn't be any way for them to start cracking across (I was careful not to get them hot and de-temper). Then I hand polished the edges with 400 grit, also done lengthwise. The ends were left full width so they would fit correctly. You can then fine tune them with the adjustment screw to your preferred tension. This works well with the NMA aka 1858 models equally well.

SCORRS     SASS     BHR     STORM #446

Marshal Will Wingam

Quote from: 45 Dragoon on December 04, 2019, 02:33:38 AM
  Got no help from here. I've only ever lightened the existing flat springs. For the past year /year and a half though, I've been changing all my customers Remington's over to coil hand, trigger and bolt springs. It definitely allows much more "tuneability" and of course the reliability is "off the chart". I think it's the best upgrade for Remingtons since 1890 !!  I wind the springs myself and the only "drop in" spring is the bolt spring. The trigger and hand take some modification.  I'll put up a "how to" if there's any interest.  I could supply the springs .  .  . 

Mike
I'd be interested in how you do this. Sounds like a couple good mods, there.

SCORRS     SASS     BHR     STORM #446

King Medallion

King Medallion
I thought I was wrong once, but I was mistaken.

RRio

"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

© 1995 - 2024 CAScity.com