Uberti cylinder bushing

[Gus Walker]

 Uhhhh question.  I have two ubertis in 45 colt. One stainless imported by Stoeger. The other is a uberti in the matte finish from Sportsmans warehouse.
Both cylinder bushings Cannot be remoevd. Did uberti make cylinders with non removable bushings?

[Bibbyman]

I suspect they are removable.   My two new Cattleman 45s had stuck bushings.  It took a little tap on the ratchet end. I used a brass rod but I hear thst the cylinder pin pushed in from the ratchet side will work also. 

The bushings in my Cattleman revolvers needed a little polishing to get them to slide outand back in easy.  Then after they were shot a few times, the bushings stuck again.  After a couple of cycles,  they gave no more problems.

[Abilene]

Uberti's stainless cylinders do not have removable bushings.  As for the matte finish, I suspect it is removeable though I'm not positive.  Many blued cylinders from Uberti have bushings that are difficult to remove the first time.

[Gus Walker]

   Thanks Abilene. Thats what i thought just looking at it. The matte finish 45 looks the same.