What tools would you use for this pattern?

[DUKE DEADEYE NUKEM]

What tools would you use for this pattern? Looks like three parallel equal size beads with a chevron cutting into the center every 3/8 ths inch or less.
http://s921.photobucket.com/albums/ad54/LEVERACTIONSHOOTERS/SCABBARDS/?action=view&current=BORDERTOOLING.jpg

TIA,
Duke


This one someone sent me is kinda close.  

[Skeeter Lewis]

Hi

I'd suggest two border tools - maybe D434 and D606. For the middle one, that's a mulefoot that starts with the letter U. There are several that look like that. It's just a question of size. To make the parallel lines, it's easiest to use dividers with one leg running along the edge of the leather. Do you have the Tandy catalog? The Craftools are listed there. Skeet

[DUKE DEADEYE NUKEM]

Hi

I'd suggest two border tools - maybe D434 and D606. For the middle one, that's a mulefoot that starts with the letter U. There are several that look like that. It's just a question of size. Do you have the Tandy catalog? The Craftools are listed there. Skeet

Sure do and thanks for the reply Skeeter. I'm thinkin D637 and the D606.

[cowboywc]

Howdy
The 2 dbl lines look like they were done with a beader blade.
WC

[Helda Huginkiss]

Howdy, I have a double edged ceramic blade that cuts those parallel lines. I use a little white tool attached to the blade that hangs on the edge of the leather or you can free hand it on a marked line.  I would also bevel those lines before you use the mule shoe. Hugs Helda

[DUKE DEADEYE NUKEM]

Howdy, I have a double edged ceramic blade that cuts those parallel lines. I use a little white tool attached to the blade that hangs on the edge of the leather or you can free hand it on a marked line.  I would also bevel those lines before you use the mule shoe. Hugs Helda

Thanks a bunch Helga.