Remmi Gas Seal

[Joe Burchette]

I just found it.  Thanks

[Cuts Crooked]

Where can WE find this information?

[Joe Burchette]

Google "British Western Shooting Society" and look in the message board.  Not very far back.  Found it by accident. Don't know exactly where to guide you.  You might try this:  www.tonywilk.co.uk/info/antifoul.html  What they do is mill a 10mm recess about 10 mm deep in the front of cyl where the pin is and insert a brass bushing that sticks out some.  Requires filing the rear of the frame below the barrel.  Puts the cyl pin opening slightly ahead of the cyl. frame gap.

[Professor Marvel]

Happy Holidays and Fellicitations:

I believe you will find a lengthy discussion of the "Remington Cylinder Bushing", aka "Remington Gas Ring"
here:
http://www.cascity.com/forumhall/index.php/topic,18133.0.html

both of our esteemed colleagues Pettifogger and Flint have done these additions in order to minimize fouling on the cylinder face/pin.

one can find more on such modifications on Flints page here: http://flints-shop.com/index.php?option=com_content&view=article&id=5&Itemid=8

hope this helps
yhs
prof marvel