forcing cone leading

Started by aalmcc4, July 18, 2009, 06:29:39 PM

Previous topic - Next topic

aalmcc4

Got my USFA Rodeo.  Love it.  But i notiuced when cleaning after my first time out shootign it, there is fairly heavy leading in the forcing cone area.  Ther eis no leading near the muzzle.  Just in the forcing cone.  I really had to scrub the heck out fo it to get it even close to clean.

I've only shot 50 rounds of my own handloads.  Wincehstrer brass, Remington Standard       

Fox Creek Kid

This can be caused by shooting undersized bullets. Shoot bullets sized to the chamber & NOT the barrel groove diameter and make sure you're not shooting "cream puff" reloads as well.  ;)

Virginia Gentleman

Shooting bullets atleast .452" to .455" for some reason keeps leading to a minimum in all of my guns.

aalmcc4

Thanks guys.  The "cream puff load" comment is interesting.  I was shooting commercial hard cast RNFP (CAS type) bullets sized to .452 over 6.0 grains of Red Dot.  That's not too light a load, is it?  I think 6.5 grains of Red Dot is a max load in the Lyman manual.       

Whiskey Hayes

I don't think its your load but you failed to mention bullet weight.  .452 dia work well in all my .45's, USFA and Colts with no leading.  You might want to check chamber throat dia., it's best to match bullet dia. to throat dia.  You should be able to push your bullet through the chamber throat.  You might also try a softer cast lead bullet.

I suspect your forcing cones might be a hair rough causing the leading.  Purchase a Lewis Lead removal tool from Brownells. it comes with a forcing cone cleaning attachment that will help polish the cone.  I used this tool on each of my pistols the first 3 to 4 times I shot them.  I did get a little lead out of one Rodeo the 1st couple of cleanings then it quit.  I'll use Lewis Lead remover now once a year without getting any lead, roughly 5,000 rounds per pistol.  I use JB Bore paste with the Lewis Lead remover.

WH

Virginia Gentleman

I'm somewhat lazy when it comes to a rough bore sometimes as I will just fire 200-500 jacketed bullets through the gun before shooting lead rounds. ;)

© 1995 - 2024 CAScity.com