Richard masion conv

Started by Missouri Half Breed, August 26, 2009, 06:44:18 AM

Previous topic - Next topic

Missouri Half Breed

Ok a little advice from you old timers is needed i bought a 51 conv shot about 200 rounds throufg it and the boldt spring that holds the cindler in place has broke , order ing one is no big deal my quistion is what did i do to cause this to happen. it is my favort peace and i will get a mate to it, i allso have a thunder 3.5 in barell that has given me no trouble. when i took the 51 apard the bolt spring fell apart in my hand was it just a bad one or do i need to order a speceal one i shoot it a lot more that the thunder (note i have been shooting smokless powder) but am going to switch to the dark side on both wepons will this help??
Missouri Halfbreed
your a daisy if you do

Long Johns Wolf

Probably just a bad spring. Since you want to use the pistol for serious shooting you may want to consider installing a replacement of the piano wire kind. That's what I did in all my shooters and had nod broken bolt springs after the replacements.
Long Johns Wolf
BOSS 156, CRR 169 (Hon.), FROCS 2, Henry Board, SCORRS, STORM 229, SV Hofheim 1938, VDW, BDS, SASS

Missouri Half Breed

Thanks il consider giving that a try it is my favorit gun
your a daisy if you do

SMF spam blocked by CleanTalk
© 1995 - 2024 CAScity.com