Herco powder

[The Factor]

Usually load .45 colt 250 gr bullet,with 7 gr. of Unique.
All the local supplier has is Herco. Some SNAFU getting it ito the country.
What would be the Herco equivalent load?
Thanks

[Silver Creek Slim]

Try this.

Slim

[Delmonico]

Herco has been around for at least 75 years and is a wonderful powder for heavy hunting loads in 10-28 gauge shotgun and heavy loads in non-magnum shandgun rounds.  since your 7 grs of Unique is below what Alliant recomends I am hoping you have Lab developed data to support this.

Herco ain't gonna be forgiving on less than recomended charges, I would consider 8 grs cause it don't operate well below the designed operating pressures.  Still an very good powder for it's intend uses, it has lost it's popularity because it don't leave the pistol squeeky clean.  I myself never let that bother me on loads that work well, but it seems to be a concern for a lot of folks today.  If you want clean burning. don't bother. 

[Silver Creek Slim]

Herco has been around for at least 75 years and is a wonderful powder for heavy hunting loads in 10-28 gauge shotgun and heavy loads in non-magnum shandgun rounds.  since your 7 grs of Unique is below what Alliant recomends I am hoping you have Lab developed data to support this.

Herco ain't gonna be forgiving on less than recomended charges, I would consider 8 grs cause it don't operate well below the designed operating pressures.  Still an very good powder for it's intend uses, it has lost it's popularity because it don't leave the pistol squeeky clean.  I myself never let that bother me on loads that work well, but it seems to be a concern for a lot of folks today.  If you want clean burning. don't bother. 

Check here

Slim

[The Factor]

Silver Creek Smith,
Thanks for the link.
I searched all over Google for something like that.
I figure 7 gr. Unique is about 7.8  or 8 gr. of Herco

[Silver Creek Slim]

Silver Creek Smith,
Thanks for the link.
I searched all over Google for something like that.
I figure 7 gr. Unique is about 7.8  or 8 gr. of Herco

That's what I figured too.
Also, the following link states:

USE THIS DATA WITH ALLIANT BRAND POWDERS ONLY.

REDUCE LOADING DATA 10% TO START AND WORK-UP.

DO NOT EXCEED THE LOADS DISPLAYED ON THE SITE OR ALLIANT'S RELOADERS GUIDE.

http://recipes.alliantpowder.com/

Slim