Okaaaaaaaaaaay I give in!!

[Paladin UK]

Okaaaaaaaaaaay I give in!!

My Pedersoli Rolling Block Carbines firing pin refuses to give up its secret on how ta remove it!!
In all the other Rollers all you do is remove the cross pin and Walla! Out it comes!!
Not so with the Pedersoli!! It has a cam!! So when you remove the cross pin out comes a cam jobbie!! the firing pin happily slides back and forth BUT refuses ta come out!!
Soooooooooo!!
HOW DOES THE POXY FIRING PIN COME OUT!!

Paladin (Whats gonna use a BIG HAMMER Soooooooooon!!  ) UK

[Professor Marvel]

Greetings Paladin -
Please look here

http://www.vtigunparts.com/store/shopdisplayproducts.asp?id=60&cat=Pedersoli+Rolling+Block+Target+Rifle

Is it possible that the firing pin is also trapped by the Pedersoli
Firing Pin Retractor (Rolling Block)piece number 115, Perhaps you
need to remove that before the firing pin can come out.

yhs
Prof Marvel

[Paladin UK]

Ho Professor thanks fer yer reply.........

If only!! I have removed the retractor as well, I just cannot see WHAT is holding the pin!! It moves back and forth without any friction and comes so far and then it seems as if its hitting something and that is why I don't want to force it out!!

Paladin (Whats gonna get a bigger hammer soooon!! ) UK

[Paladin UK]

Yehawwwwwwwwwwww
Who Da Man!!!

I noticed that when looking into the breech block that the FP was jamming up against the INSIDE  shoulder!! This created a burr thus stopping the pin from coming out. I attacked the pin with a Very Small electrical screwdriver and after `bout half an hour of scrapping

WALLA!!!!

You can see where its still a bit high, but like a said. I got me a BIG HAMMER!!!





Paladin (Whats right pleeeeezed with hisownself ) UK