Needing 2 screws for 92 Rossi

[Athena Jake]

I own an EMF Hartford (Rossi) 1892 Rifle 44/40 24" Hexagon barrel case hardened frame.

I have managed to come up short on two of the screws:
(From the provided EMF "Exploded View")
# 49 -- Cartridge Guide Screw (1 ea, right side)
# 65 -- Lever & Breech bolt pin hole plug screw (1 ea, Left side)

They are both the screws that have to be removed to the drive out the Lever & Breech bolt pin.

Any one know what size they are and if Brownells or some one carries them?
I pretty much figure they are metric.

[Ten Wolves Fiveshooter]

Howdy Jake

        Call Debbie or Becky, at E.M.F. they should be able to help you on this , I've ordered screws from them in the past , and there service is great. http://www.emf-company.com/dealers.html


                                                                      tEN wOLVES 

[Pettifogger]

Call EMF.  They usually carry a pretty good supply of parts and are very helpful.

[Athena Jake]

oookkaaay...

When I opened the box, and found them missing I called EMF right away.
Talked with the Lady in parts too.
They gave me the numbers for M&M, Kiowa, etc.

Have had an email out to Kiowa, for a bit, didn't want to pester as I don't know if he is off at a shoot, or busy or what.
So I figured I would ask and see if any one knew the sizes of the screws.

[Curley Cole]

I sent you a PM,

Curley

[Athena Jake]

Thank you Curley,

After being told to check out the afore mentioned people, I recieved in the mail today, the screw I was Missing, and a note from Don saying it was what I needed, and it was.


Was only actually missing #65 (as the hole on the other side don't have a screw!)
So the rifle is completed, and in the mean time I spent a fair bit of time pulling out all the parts and stoning them.
So Thank you all for your assistance and interest, I had purchased said screw from M&M also in the mean time, so I will keep it as a spare.

[Curley Cole]

Jake

Rest assured that EMF will always be there to take care of you. I have been dealing with them since 1979, and they are the reason that the majority of the guns in my safe have their initials somewhere on them...

Glad yer up and runnin. My pistol is ready for me to pick up now, then I can fit the other set of grips and be ready for the next match.

good shootin
curley