ageing, shading, distressing

Started by santee, May 15, 2008, 07:47:36 AM

Previous topic - Next topic

santee

Been seeing a lot of folks add nifty different age/distress effects to their holsters.
When I was sponging on my first coat of dye, I got darker areas and some drips. Stopped before the second coat cause I liked the gradation from dark to light. Kinda gives it that look like it was stained with sweat or gun oil.

What methods do you guys tinker with?
Historian at Old Tucson
SASS #2171
STORM #371
RATS #431
True West Maniac #1261

Roosterman

www.fowlingguns.com
Known to run with scissors from time to time
Citadel of Sin Social Club

crossdraw

Santee
I got different shading by wetting the leather with water a little heavy in some areas and less in others prior to dyeing. I also got some shade difference while trying to correct the above  ::) by rubbing the leather with a dye soaked pad of 0000 steel wool.
"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." - George Washington

HorsePen Henry

Santee,
That looks great and I like it. Which dye and color did you use on that? Nice warm color and just enough variation to make it convincing.
The more you read and observe about this Politics thing, you got to admit that each party is worse than the other. The one that's out always looks the best.
-Will Rogers-

The price of FREEDOM is in blood and money and time. Mostly in blood. It aint free.
Belly up to the bar and quit yer bitchin'. Be grateful to those who have paid the ultimate price.
-Horse Pen-

"Never squat with yer spurs on and never high five a baby after waffles."
-author unknown, but it coulda been Will Rogers-

NCOWS#3091
STORM #300

santee

I used a Fiebing's med. brown, diluted with Isopropyl alcohol...or Maker's Mark whiskey...can't recall...

Learned after the first holster to dilute it a little (I tried 60/40); and this time I was going to experiment with multiple light shades. But I stopped at this.

Hmmm...dye soaked steel wool pad, eh??? I'll give that a go!
Historian at Old Tucson
SASS #2171
STORM #371
RATS #431
True West Maniac #1261

ChuckBurrows

http://www.wrtcleather.com/1-ckd/tutorials/aging-leather-zurl.jpg

and the steel wool doesn't have to be dye soaked - plain works good too........
aka Nolan Sackett
Frontier Knifemaker & Leathersmith

Ace Lungger

Santee , That LOOKS GREAT :) :) I like it !!!
Chuck, I got your DVD set on Wensday and I want to thank you for doing that DVD, and i suggesty to all beginners like me, it is a must have. I have been looking for eggeye neddles in size 1, and linen 5 cord thread and I have had no luck finding it, I went to the supplier in Oklahoma because I live in Kansas, I couldn't find those to items, next time I watch your DVD I will get the name of the other suppler you use! I have been using the Vinagroon dye that you mentioned and I love it, going to make some of the walnut Brown> I have spent 6 hours in the last 2 days, trying to find out what is in Eco-Flow Gum Tragacanth, so i could make my own! I got some pure Gum Tragacanth in powder form, just don't know what else to use other than water! If you use the cake makers method it gets to a paste state! So I don't know if the glucose or the confectioner's sugar, that makes it a paste.
I wish every one a GREAT WEEKEND :) :)
ACE
member of the Cas City Leather family!
Member of Storms
Member of Brown
SASS # 80961

santee

Thanks, guys. Thanks, Chuck, for the article. Very helpful.
Historian at Old Tucson
SASS #2171
STORM #371
RATS #431
True West Maniac #1261

© 1995 - 2024 CAScity.com