The Wesson & Harrington (H&R) 1871 Buffalo Classic

[Marshal Will Wingam]

I modified a SxS double by grinding off the sear that catches the ejector on each side. Now it just lifts them up so you can get ahold of them. Sounds like the same idea as yours, GG.

[Delmonico]

I need to check, but if I remember right there is also just a spring you can remove with out doing any modification.  The ejector is spring loaded.

[Will Ketchum]

Guns, if you are thinking of the forum that was dedicated to the Handi Rifle, Marlin shut it down if I remember correctly.  They apparently felt that there was too much gunsmithing advice be given and that they might be liable.

Graybeard has a H&R board.  you might be able to find what you need there.

Will Ketchum

[Pappy Myles]

Ejector modifications.........

Remembering now, that was where I got the modifications ( buffaloclassic.tripod.)  I had Al Horton of single action services in Houston Texas modify mine.

Also. I sent the receiver in to NEF and got the metal trigger guard installed for about $75.