Does anyone know where I could obtain an Uberti Presentation Case for a BP 58 Rem 8" barrel ?
Dixie Gun Works is the only place that I could find that sells Uberti cases, but they have been out of them for awhile now & no estimate on obtaining more.
I am thinking that maybe Uberti is not making them anymore and are being made by another manufacturer.
I did purchase a Smith & Wesson case for one of my revolvers, and had a custom brass plaque placed over the S&W Logo stamped on the top of their case. I'm looking for a best quality blackpowder case w/ the usual compartments.
I did have an Uberti case years ago, but sold it with a gun.
These Uberti cases are of the highest quality, if no one has ever seen one. I bought a double revolver case a few months ago, but it was very cheaply made, & I returned it. I don't care for some of the other cheap ones that I saw from a few places. I would even purchase a used one.
There are no gun shows anymore in my area.
Thanks for any help,
Barbarosa
www.billscases.com
I have no doubt there would be no questions about quality.
This is way cool.
Barbarosa,
Somedays it pays to be more lucky than good???? ;D
Those are really fine looking cases. As far as I know, he is the only one doing them commercially now. I am curious how long it took you to get them. Safe shooting. Deadeye.
Those are beautiful. He does do good work.
Does anyone know if felt attracts moisture? In other words, will a gun rust in such a case?
Quote from: Barbarosa on May 30, 2007, 10:18:27 AM
Here's the other one >
Barbarosa,
Your blued Uberti looks nice. The grips aren't shiny like most. (I hate shiny grips.) Did you refinish them?
Lawman
Barbarosa, . . Nice cases and nice guns. . . Thanks for sharing. Haven't made any for myself, but made one two years ago out of an old case for silver ware that I picked up at a resale shop. Used it for a pair of '51 Colts as a gift for a friend of mine. Was cheap and quick way to make a presentation case. Foam under the pistols and all the extra stuff in a pull out drawer underneath. Worked out good. I'll look around for picture to post. Good shootin', . . . :)
Quote from: Wolfgang on May 31, 2007, 09:36:30 PM
Barbarosa, . . Nice cases and nice guns. . . Thanks for sharing. Haven't made any for myself, but made one two years ago out of an old case for silver ware that I picked up at a resale shop. Used it for a pair of '51 Colts as a gift for a friend of mine. Was cheap and quick way to make a presentation case. Foam under the pistols and all the extra stuff in a pull out drawer underneath. Worked out good. I'll look around for picture to post. Good shootin', . . . :)
Sounds like an excellent idea for a gun case. Please do post pictures if you can. Deadeye.
Think I will have to order one of these for my pair of 2nd Generation Navies! ;D
Quote from: Deadeye Don on June 01, 2007, 07:05:51 AM
Sounds like an excellent idea for a gun case. Please do post pictures if you can. Deadeye.
Here ya are Deadeye, . . not great photos, taken with a disposable camera and scanned in, . . it looks lots better. Came out very nice. Padded in the top to hold the pistols in place and two partitions in the drawer to keep the other stuff in place. Cleaned the outside finish and then put on a light coat of varnish with a little bit of stain mixed in. The silver ware was old plated stuff with the plating worn off. Thru it all away. See 'em at the bottom of the page at: www.drburkholter.com/cf9.html (http://www.drburkholter.com/cf9.html). Good shootin', . . . :)
A question regarding Bill's Custom Cases (sorta).
In the photo gallery of the "gambler" cases..
http://www.billscases.com/gambler8.jpg
I've never seen a revolver like that. Can anyone tell me if that's an original or a repro? What make and model? It just looks very interesting to me. I've never really thought about affording an "original" pistol, but just curious as to the specs and if possible what the going rate might be. ;D
One thing I notice about this hobby, every time you go looking around, you find something new and interesting. It's a great feeling.
Hard to tell from that picture. There were lots of little pocket pistols made. Smith & Wesson no. s 1, 1-1/2 , etc. lots of other makers as well. I've got an article saved somplace out of "Guns of the Old West" that showed about a dozen different ones. All very similar. Mostly rimfire and with spur triggers. There was a Smith & Wesson no. 1 or no. 2 ( I forget which it was ) in the local guns shop a few months ago for $200. I've heard of these old pocket pistols blowing up with modern .22 shorts. So ya gotta be careful about gettin' em for shooters. Good shootin', . . . :)
Well, if I did do any shooting with such an old revolver I'd probably use weak BP loads if anything. I did some reading and it looks like a Hopkins & Allen "Dictator", but yeah, there are alot of similar pistols.
Thanks a bunch. :)
Much obliged, Barbarosa. ;D
I found one on www.goantiques.com and also www.gundersonmilitaria.com
I suppose some of these require abit of work to restore to firing condition. :)
Funny I've always been more a fan of the bigger bore, but lately have developed an appreciation for the odd .22 or .32 piece.
Quote from: Wolfgang on June 02, 2007, 09:48:58 PM
Here ya are Deadeye, . . not great photos, taken with a disposable camera and scanned in, . . it looks lots better. Came out very nice. Padded in the top to hold the pistols in place and two partitions in the drawer to keep the other stuff in place. Cleaned the outside finish and then put on a light coat of varnish with a little bit of stain mixed in. The silver ware was old plated stuff with the plating worn off. Thru it all away. See 'em at the bottom of the page at: www.drburkholter.com/cf9.html (http://www.drburkholter.com/cf9.html). Good shootin', . . . :)
Thanks for the picture. I actually think that looks really nice as a presentation case. Plus I am sure you did it with minimal expense. I think it is a great idea for all of us do-it-yourselfers out here. Safe shooting. Deadeye.
Yeah. I'm highly fond of .31 or .32 for C&B and cartridge (respectively).
I was also considering a Colt 1849 .31 with the R&D Cyl for .32 S&W. But nothing looks as nice as some of these originals. ;D
Joe Salter's site is very good too. Thanks.
Not to hijack the thread but,
Here's my Little Bitty.
(http://i25.photobucket.com/albums/c83/1Old6Dragoon1/63RemyPMConversion-rgt.jpg)
1863 Remington Pocket Model 32 RF Factory Conversion(non-Remington Factory)Converted to 32 C.F. by me.
Uses 32 Colt Short.
Now Charlie, ya done showed us that thank once! So ya need to get busy and make a case for it. Then you can show us again on this thread. ;D
Nice work on the cigar case. Good idea. ;)
Quote from: River City John on April 24, 2007, 12:24:30 PM
www.billscases.com
I have no doubt there would be no questions about quality.
Bill is GREAT to deal with an fun to talk to.
Being in MN, and seeing him in person at a number of antique shows, works to my advantage.
All of the stuff he uses is from the USA and he does a fantastic job.
He will even do custom case work and you can finish it yourself. ( I am working on a Walker case for my setup as well)
I don't think the possible moisture problem was answered.
Any problem with guns rusting in these cases?
And would a well oiled gun screw up the material in the inside?
By the way, what is the material inside these cases? I was thinking pool table felt would be a good choice...not sure. ???
Another question:
If you were making a presentation style case for a pair of 1875's, what other "period" items could go into the box besides loaded cartridges? Cleaning items? Small oil can? Maybe a place for a cigar case and a box of matches? Playing cards?
Check out azWoodman.com for boxes. They are custom made to your dimensions and styles, and out of your choice of several woods, and even have a selection of hardware to choose from. Very nice if you want to design and finish your own display. I gave $65.00 three years ago for a very fine walnut one designed to hold two 5 1/2" SAA pistols and 12 rounds of ammo. There's some room left over for a small knife or screwdriver set, or something similar.
Someday I'll finish it...maybe.
Yankee Will, I'm not sure with these old Irons, but I own a pair of custom Colt 1911's that I have placed in a home-made quarter-sawn cherry case. Actually built it in woodshop as a "jewelery box" no one knew what it was for until I put the lining in! Basically, I live in a pretty dry area, Southern California, but I used pool table felt and just take them out once a week and oil and dress them. the felt's cheap, so I don't care if it ruins it. There is some marking, but it just adds character. In the drawer underneath is all the hardware, four extra magazines, screwdriver (only need one on a bona-fide Colt!), and 45 acp rounds.
I hope that helps!