Sell me something

Hoof Hearted · December 30, 2007, 11:55:47 PM

Ya gotta have an unsed this or that. Maybe some left over parts from a long forgotten project? How about a 44 Colt R&D cylinder or a botched barrel?

I'm itching to do something. I need a new project

How about a trade?

Tommy tornado · December 31, 2007, 08:07:39 PM

I have a section of horn/antler, a .45 colt cylinder from EMF for a Hartford Colt Clone, a pair of black grips off of a Colt Cowboy, a hammer for a Colt Clone, a ejector spring from an Uberti Cattleman, a trigger spring from an Uberti Cattleman, a main spring from an Uberti Cattleman, an ejector rod from an Uberti Cattleman, and 12 percussion nipples from a pair of Uberti Navies. Any interest in any of these parts? If so, then what and make an offer. Otherwise I am going to try e-bay/gunbroker.

Hendershot · January 01, 2008, 09:23:54 AM

how 'bout a left hand shoulder holster. Triple K. Reddish brown. For a 58 Remiington. NIB (bag). Will trade for 58 parts. (Euro,Uberti,Pietta).

Hoof Hearted · January 01, 2008, 10:40:36 AM

Quote from: Barbarosa on December 31, 2007, 06:06:02 PM
Hey HH,

Have you ever tried building one of these kit-guns?

Those derringers look pretty neat. Also, the Spiller & Burr Revolver.

Here's a link > http://www.dixiegunworks.com/default.php?cPath=22_162_194

Barbarosa

I just can't get into the "kit" thing $:-\$
My shooting buddy is a master Flint lock maker and he'd make fun of me

Would like a REAL Spiller & Burr though...........

Hoof Hearted · January 01, 2008, 10:47:07 AM

Quote from: Tommy tornado on December 31, 2007, 08:07:39 PM
I have a section of horn/antler, a .45 colt cylinder from EMF for a Hartford Colt Clone, a pair of black grips off of a Colt Cowboy, a hammer for a Colt Clone, a ejector spring from an Uberti Cattleman, a trigger spring from an Uberti Cattleman, a main spring from an Uberti Cattleman, an ejector rod from an Uberti Cattleman, and 12 percussion nipples from a pair of Uberti Navies. Any interest in any of these parts? If so, then what and make an offer. Otherwise I am going to try e-bay/gunbroker.

Tommy

Sent you a PM last nite.
Can you take a pic or two and desribe the condition of the SAA parts? I am very interested.
Please email to:

buckoff@alltel.net

THANKS!

Hoof Hearted · January 01, 2008, 10:48:41 AM

Quote from: Hendershot on January 01, 2008, 09:23:54 AM
how 'bout a left hand shoulder holster. Triple K. Reddish brown. For a 58 Remiington. NIB (bag). Will trade for 58 parts. (Euro,Uberti,Pietta).

Hendershot

Sorry, shoulder holsters aren't for me

What 58 parts are you needing?

Tommy tornado · January 01, 2008, 01:10:40 PM

I will try to download pictures tonight of the parts. I used to have a picture of the cylinder and hammer because I was going to trade them off to a guy for a abused Walker but the deal fell through.

Hendershot · January 01, 2008, 02:15:42 PM

HH, Yea... I found out shoulder holsters are not to my likeing also. Not to mention one for each side. I could use hammers, springs, screws, triggers,bolts etc for any of the 3. $60.00 worth. Can't have enough spare parts. I have a loose rammer when latched. Was going to try a new latch on the end of the rammer, or do you know a guick fix for that problem? Or anybody?

Tommy tornado · January 01, 2008, 03:53:57 PM

Not for sale but here are some pictures of my conversion.

Tommy tornado · January 01, 2008, 03:54:58 PM

Set 2, it has a #17 stamped on the loading lever.

Tommy tornado · January 01, 2008, 08:39:30 PM

Here are the colt parts

Tommy tornado · January 01, 2008, 08:40:43 PM

Here is the bullet mould and crimp die

Tommy tornado · January 01, 2008, 08:42:15 PM

close up of the mould

Pettifogger · January 02, 2008, 02:34:56 PM

How much for the Colt Cowboy grips and do they have the screw? I got a pair but the hole must be metric as none of the grip screws I have will work.

Hoof Hearted · January 02, 2008, 06:30:48 PM

Tommy

I have a remington Conversion that has chambers bored as large as yours

Have you ever measured them with a plug gauge or taken a chamber cast of them? I am interested to know just how big they are bored.

Not to step on Pettifoggers toes, but did I buy the grips? At this point I'm not sure

Tommy tornado · January 02, 2008, 08:36:59 PM

No, the grips where not bought, only the clone parts, the mould, and the crimper. The grips are currently on E-bay. My seller name is Thomass281. Right now they are $2. They don't have a screw. I was trying to see if they would work on anything other than a Cowboy, but they don't. The closest thing they would fit on was a Blackhawk but it would have required fitting and drilling. I also have some Starline .44 colt brass on Gunbroker under Tommy Tornado.

Tommy tornado · January 02, 2008, 08:39:07 PM

I might also have some holsters for sale in the coming months as well.

Hoof Hearted · January 02, 2008, 09:09:46 PM

Tommy

Sent you a PM

Consider all of that stuff (less the grips and horn) SOLD!

The General · February 11, 2008, 10:59:34 PM

I have a nice pair of Pewter custom grips for a Ruger Vaquero I would be interested in trading for some BP gear for my 58' Clone Remmy's in .44 caliber. Powder horns, nipple wrench, a whole clone you're not using, whatever. These will not fit the new model Vaquero. They are pretty nice.

Hoof Hearted · February 11, 2008, 11:23:04 PM

Howdy General!

I sent you a PM

Man I have been hagglin' like crazy.....I just swapped a Colt Lightning for a real nice Roller with a Badger bbl in 45-90 and Shaver Soule sight! The Thunderer turned itself into an 1860 (Iron frame) in 44-40 with a 4th gen Cowboys and Indians short stroke and I bought a Henry trapper last week also

Then this just when I was trying to figger out what kinda grips to put on my Colt barreled Vaquero I built this weekend

I'm in HOG heaven, like a pig in slop