Probably a dumb question

[GunClick Rick]

Pietta and Ubertis,can these all be set up with the same type of nipple so you can use the same caps for all?

[Trailrider]

GCR-
You should be able to use the same caps, but there can always be dimensional difference from one gun to another, even the same make, model, etc. Just have to try each one and see how they work.  BTW, nipples refer to a portion of anatomy not discussed in mixed company. Those are cones. This is the 1870's, isn't it? 

[pony express]

GCR, I don't think you're gonna get the 2 on the right to use the same caps as the ones on the left.......

[Advertising]

[Pettifogger]

Stick Tresos in all of them and they will all use Remington #10s.

[GunClick Rick]

The one with the conversion has another cylinder,the 38 has to use black powder catchruges,
and now i know what that old broad i took home years ago meant,she kept wanting to show me her cones

Pettifogger,that's what i wanted to know,i was thinkin Tresos on any of them,i'll order some,but check these first
i finally be able to start shootin,just got a new hip put in

[Coffinmaker]

GCR,
You may also want to give a hard look at the new "Slixshot" cones.  They are manufacturer specific (Uberti vis Pietta)
but once installed Remmington #10s will work perfectly.  The advantage with Slixshot cones is the ability to set your guns up with reduced power main springs.
I just set up a pair of Piettas with Slixshot cones and reduced mains and they work a treat.  So far I haven't bothered to fill in the safety notch in the hammer and am having NO problems with the caps.

[GunClick Rick]

Good thought CM,i forgot all about those guys,i will do as you suggest..I have been to thier site a few times lookin and flat forgot.. Thanks~~